Schiffi
Jun 29, 11:22 AM
Under the iChat preferences on the Video tab, at the bottom there is an option for audio from the internal mic or Line-in. It may say none too if you don't have an internal I think.
more...
iFiend
May 4, 02:48 PM
The only person with the source is I0n1c and he was out of the country last update so it took him some time to compile new binaries for the release (if needed).
This could also be why it's not patched yet - with no access to the source it's harder for Apple to reverse engineer the exploit and discover what they are doing. With a need to get the update out so fast they probably didn't bother. I expect it to be in the next patch though.....
Thanks for the info. Wouldn't it be great if this was some sort of super hack that Apple can't figure out how to patch?
I can dream, right? ;)
This could also be why it's not patched yet - with no access to the source it's harder for Apple to reverse engineer the exploit and discover what they are doing. With a need to get the update out so fast they probably didn't bother. I expect it to be in the next patch though.....
Thanks for the info. Wouldn't it be great if this was some sort of super hack that Apple can't figure out how to patch?
I can dream, right? ;)
more...
leekohler
Feb 27, 03:02 PM
The thing is- when are people going to realize what absolute liars these guys are?
I can only assume that the reason they haven't is because they tell people what they want to hear, even if it's not true.
I can only assume that the reason they haven't is because they tell people what they want to hear, even if it's not true.
more...
SuAndMac
Mar 4, 07:21 PM
I have been working on a magazine for this whole week (Quark Xpress v6) and finally got it signed off yesterday. Shut down the computer and had a well earned drink.
When I turned on the computer this morning the document has reverted back to last Tuesday! (meaning a lot of lost work).
Would this have anything to do with changing permissions? (I did play around with file info on some other files.)
I have 15 other jobs going and they all seem to be fine.
I have dual 80gb hard drives - and yes, after every big lot of changes I backed up the job - but the backup drive says the same!! Anyone with any help would be greatly appreciated.
When I turned on the computer this morning the document has reverted back to last Tuesday! (meaning a lot of lost work).
Would this have anything to do with changing permissions? (I did play around with file info on some other files.)
I have 15 other jobs going and they all seem to be fine.
I have dual 80gb hard drives - and yes, after every big lot of changes I backed up the job - but the backup drive says the same!! Anyone with any help would be greatly appreciated.
more...
Mitthrawnuruodo
Feb 21, 01:16 PM
This happens from time to time with some of my e-mail accounts, too... It happens because the server is down, for whatever reason... I normally just hit 'escape' and let the account be offline for a while (you'll see a ~ symbol or a ! in a triangle next to the accounts inbox (and all folders on an IMAP account)). Then when you assume the server is back up you just hit the ~ and then 'check mail', and assuming you keep your password on the keychain you will not have to re-enter the password (if the server requests it, chances are it's still down, just try again a bit later). If the sign is the ! then you'll, get a 'go online' question...
more...
.jpg "Free tattoo flash designs 70")
RedburnIV
May 5, 11:57 PM
Battery life improved for me :)
more...
dudeofswim
Apr 30, 01:46 PM
1 dark pixel. :(
Unlikely for replacement, but take it into an apple store and see what they can do for you.
Unlikely for replacement, but take it into an apple store and see what they can do for you.
more...
Doozy
Nov 8, 11:01 AM
If you could spend time modding PHPBB to be more SEO, imagine how much better VB would be with that sime time spent optimizing it's SEO capabilities. It's ahead to begin with, the same amount (or less) of time will push it way out of PHPBB's reach.
You know I agree with you. The hardest part is convincing the client to pay for the license, but if I tell the client it will cost more optimizing phpbb for SEO than the cost of the license he may go for it.
His competition uses phpbb.
Would you rather post on a site that uses vBulletin or phpbb. I know I would prefer vBulletin but would the average user know a difference?
You know I agree with you. The hardest part is convincing the client to pay for the license, but if I tell the client it will cost more optimizing phpbb for SEO than the cost of the license he may go for it.
His competition uses phpbb.
Would you rather post on a site that uses vBulletin or phpbb. I know I would prefer vBulletin but would the average user know a difference?
more...
stevehaslip
Nov 13, 05:30 AM
hehehehe anyone want a tasteless spymac pullover for christmas?!?
whats that i hear? giggling and laughter? surely not! :D
way to sell out in the worst possible way
whats that i hear? giggling and laughter? surely not! :D
way to sell out in the worst possible way
more...
-y0-
Apr 21, 08:00 PM
The Tours I had broke after a month. The part where it splits came apart.
more...
mad jew
Sep 20, 02:08 AM
Australia and the US are still up. :(
Meh, they're usually the last to go.
Meh, they're usually the last to go.
more...
blackcatgifts
Apr 5, 03:52 AM
I need a program to start designing my website and need help with which is the best one to choose. I have been using ekm for it but it's too expensive for my needs as this is a hobby. I need to be able to design a website offline and just upload it when needed. I have virtually no budget to spend but don't mind paying a one off fee to get what I want just don't want to be paying every month. I need it to look classy and the big thing for it is I need to able to sell my items online through a shopping cart as I have alot of items at different weights and sizes etc and need to be able to set all this up quite easily. I've done many websites before just not using a mac but I haven't got loads of time to put into it unfortunately. Can anyone give me some suggestions of programs I can look at.
Thanks
Thanks
more...
celebi23
Oct 25, 04:10 PM
Looks like I'm gonna end up getting Leopard for $69 from my school bookstore. Meh, a T-Shirt is not worth the extra $60 though :(
more...
marykay9507
Feb 2, 07:31 PM
can't you just unlock and use that one? i don't know much about hacking and stuff, but wouldn't that make sense rather than getting a 4gb?
more...
Ozix
May 7, 02:12 AM
+1
Or why not an MBA? It should be able to handle Aperture fine, not sure about Final Cut - might want to ask on the MBA forum.
I thought about the Air, especially considering I'll be buying an SSD to replace the HDD in the MBP, however the 4GB of RAM and the older Core 2 Duo processors kinda scared me away. Now if the MBA has a refresh before we get back in July I'll definitely look into it...
As was your +1 for the $1199 13" or $1499 13"
Aaron
Or why not an MBA? It should be able to handle Aperture fine, not sure about Final Cut - might want to ask on the MBA forum.
I thought about the Air, especially considering I'll be buying an SSD to replace the HDD in the MBP, however the 4GB of RAM and the older Core 2 Duo processors kinda scared me away. Now if the MBA has a refresh before we get back in July I'll definitely look into it...
As was your +1 for the $1199 13" or $1499 13"
Aaron
more...
Darwin
Jan 16, 11:30 AM
My questions are... Could I still use the G5 as some kind of server for the rest of the macs in the house, what would I need to install and what benefits would I get from doing this?
Sorry it's such a broad question, but I think it'd be a shame to stop using the G5 as I still feel it's a great machine.
It all depends on what kind of service(s) you want the server to provide.
Sorry it's such a broad question, but I think it'd be a shame to stop using the G5 as I still feel it's a great machine.
It all depends on what kind of service(s) you want the server to provide.
more...
calb818
Mar 19, 04:57 PM
That's probably it then. You have to install RAM in the G5 in matched pairs, meaning same speed and capacity.
I have tried that, I have used 2 matching 1 gig strips and 2 matching 512mb strips, still no luck all I get is the fans start up, everything seems to be powered inside the box, fans, vid card fans working, nothing on the keyboard or the mouse. The power switch LED flashes twice about every 5 seconds, the front fan with the speaker seems to want to speed up then carrys on normally about every 10 to 15 seconds.
I have tried that, I have used 2 matching 1 gig strips and 2 matching 512mb strips, still no luck all I get is the fans start up, everything seems to be powered inside the box, fans, vid card fans working, nothing on the keyboard or the mouse. The power switch LED flashes twice about every 5 seconds, the front fan with the speaker seems to want to speed up then carrys on normally about every 10 to 15 seconds.
more...
Ommid
Apr 23, 08:03 AM
Ok so here is plan B in effect:
Got the retail disc on the way, going to erase my flash drive and put the retail image on that drive. Once I boot from it I'll erase the 1,1's HDD and do a clean install.
Hopefully that works.
I want to thank everyone for their input so far it's been very helpful.
It also used to be easy enough to modify the machine CD to trick it into thinking its a retail disk?
Got the retail disc on the way, going to erase my flash drive and put the retail image on that drive. Once I boot from it I'll erase the 1,1's HDD and do a clean install.
Hopefully that works.
I want to thank everyone for their input so far it's been very helpful.
It also used to be easy enough to modify the machine CD to trick it into thinking its a retail disk?
more...
adbe
Jul 23, 12:20 PM
Anyword on the "rumored" marble interface that was reported awhile back?
Seconded. I currently do all my development in VS 2008 then port to XCode and Linux at compilation time. I'd like to switch to XCode for development, but I just prefer VS2008. I'm eager to see if XCode 4 will suit my needs better than where the Express version at least has been irritating me already. I prefer all in one displays for IDEs, and XCode 3's interpretation of AIO is a mess IMHO.
Seconded. I currently do all my development in VS 2008 then port to XCode and Linux at compilation time. I'd like to switch to XCode for development, but I just prefer VS2008. I'm eager to see if XCode 4 will suit my needs better than where the Express version at least has been irritating me already. I prefer all in one displays for IDEs, and XCode 3's interpretation of AIO is a mess IMHO.
Roessnakhan
May 5, 02:10 PM
Many signs point to one not coming out next month, so don't waste time worrying about it being outdated in a month. A few months? Maybe.
Applepi
Mar 11, 10:08 PM
Internal on the SSD. If it gets unbearable I can always go back to Snow Leopard, but so far though it's been great.
MikeDTyke
Feb 24, 09:24 AM
NAS noob question now.
how do you transfer files between folders and drives etc?
i think thats whats putting me off is ease of file management
Ooh thats an interesting question, that you would think simple to answer. NOT!
So lets say you have the NAS with 4 internal drives and say an external off usb.
The 4 drives will typically be in an array, so one protected filesystem. Off this you can have one or more network shares using this one filesystem, each can be restricted user/pc access and can have a usage limit set.
External drives are seperate filesystems so a network share would normally need to be set up to show the contents of the external on the network.
So we end up with something like:
Internal 4 drives = Filesystem 1 = Network share 1
External 1 drive = Filesystem 2 = Network share 2
So say you had a file on the external and you needed it on Filesystem 1?
Option1: mount both network shares from your PC and copy from 2 to 1. SlOW
Option2: SSH onto the NAS (It's just a linux server) and type cp /filesystem2/filename /filesystem1 (Eveything is copied locally on the NAS, you're well l33t now)
Option3: SSH onto the NAS and create a softlink connecting the external drive as a folder under Filesystem1. ie. ln -s /filesystem2 /filesystem1/External (External drive will appear as a folder under the Network share 1 , now you are super l33t, proceed to IT godlyness)
Option4: Setup RTRR (real time rsync replication) the qnap NAS' can have jobs set up to replicate between filesystems. (Not as l33t, but everything is duplicated nicely)
3 Means that everything will appear under 1 big filesystem. 4 means you do it once and then never repeat it. Moving files under 1 or 3 from a pc will result in a lot of network traffic. :cool:
how do you transfer files between folders and drives etc?
i think thats whats putting me off is ease of file management
Ooh thats an interesting question, that you would think simple to answer. NOT!
So lets say you have the NAS with 4 internal drives and say an external off usb.
The 4 drives will typically be in an array, so one protected filesystem. Off this you can have one or more network shares using this one filesystem, each can be restricted user/pc access and can have a usage limit set.
External drives are seperate filesystems so a network share would normally need to be set up to show the contents of the external on the network.
So we end up with something like:
Internal 4 drives = Filesystem 1 = Network share 1
External 1 drive = Filesystem 2 = Network share 2
So say you had a file on the external and you needed it on Filesystem 1?
Option1: mount both network shares from your PC and copy from 2 to 1. SlOW
Option2: SSH onto the NAS (It's just a linux server) and type cp /filesystem2/filename /filesystem1 (Eveything is copied locally on the NAS, you're well l33t now)
Option3: SSH onto the NAS and create a softlink connecting the external drive as a folder under Filesystem1. ie. ln -s /filesystem2 /filesystem1/External (External drive will appear as a folder under the Network share 1 , now you are super l33t, proceed to IT godlyness)
Option4: Setup RTRR (real time rsync replication) the qnap NAS' can have jobs set up to replicate between filesystems. (Not as l33t, but everything is duplicated nicely)
3 Means that everything will appear under 1 big filesystem. 4 means you do it once and then never repeat it. Moving files under 1 or 3 from a pc will result in a lot of network traffic. :cool:
Blues003
Apr 25, 06:20 AM
Hi guys!
I'm considering buying either a MBA or a MBP 13'' in the future, and one of the toughest tasks I'd like to do with it would be running GarageBand or Logic Pro. Mainly, I'd be composing Jazz pieces (Piano, Bass, Percussion, Sax and Guitars, in any number of combinations), some solo piano pieces, and maybe some Game-music.
I'd like to know if any of you has experience with the MBA 13'', and can tell me if it is powerful enough for this kind of task. While I would like the portability, I want my laptop to be my sole computer. I know the MBA can run all the other tasks I intend it to alright (Web Browsing, Video-watching, Chatting, Photoshop, PS2 and Nintendo DS Emulation). Music-creating is the only one still holding me back. ;)
Cheers!
I'm considering buying either a MBA or a MBP 13'' in the future, and one of the toughest tasks I'd like to do with it would be running GarageBand or Logic Pro. Mainly, I'd be composing Jazz pieces (Piano, Bass, Percussion, Sax and Guitars, in any number of combinations), some solo piano pieces, and maybe some Game-music.
I'd like to know if any of you has experience with the MBA 13'', and can tell me if it is powerful enough for this kind of task. While I would like the portability, I want my laptop to be my sole computer. I know the MBA can run all the other tasks I intend it to alright (Web Browsing, Video-watching, Chatting, Photoshop, PS2 and Nintendo DS Emulation). Music-creating is the only one still holding me back. ;)
Cheers!
mnkeybsness
Jul 4, 01:36 AM
i had that same problem when i used the "minimize in place" hack that installed an old beta of the dock.
No comments:
Post a Comment